TPE Sex Doll Paste (50ml)

Available in two skin tones: Fair and tan.

• It is applied to the affected area best with a small plastic or metal spatula, for easy spreading.
• Once applied and smoothed out, simply allow it to cure for a full six hours or use moderate heat from a hair dryer for a full cure.
• Be sure to wear a protective face mask that fully covers the mouth and nose, plus work in a well-ventilated area as a safety precaution.
• For smaller, less severe tears or injury to the TPE sex doll’s skin, use our TPE Sex Doll Repair Glue.

The key points:

• It will sink a little after each fill and cure, and the cavity needs to be filled several times.
• The interval between each filling should be greater than 6 hours.
• Do not spill glue when filling.
• Lie down the doll horizontally and use a hairdryer to speed up the solidification or allow it to ventilate to solidify naturally.
• Repeat the procedure until the hole is filled.

Reminder:

• Please be careful when filling, do not drip the glue on the undamaged place, so as not to damage the material.
• It is recommended to use a small area or simulate operation first, and then fill in after mastering the skills.